Water based paint defoamer is developed for foaming of water-based paint. When it is added to the production of water-based paint, there will be no pinholes, spots, fish eyes and other problems.

It is known as "gold" in industry and can be used in industry, agriculture and military. People often extract various mineral elements from rare earth, but rare earth often produces foam when extracting other elements. Therefore, according to the characteristics of rare earth foaming, someone invented a special rare earth defoamer to solve the foaming problem.

Today, Xiaobian popularizes some application knowledge about asbestos tile defoamer. Because there is no introduction about asbestos tile defoamer on the Internet, Xiaobian only briefly talks about it here. If you know more than Xiaobian, you are welcome to add.

In the plastic production process, if organic silicon defoamer is added to the raw material, the problems such as bubbles, ripples, cracks and spots caused by moisture can be eliminated without adjusting the production process of the product. It has no adverse effect on physical and mechanical properties, saves time and effort, improves production efficiency and reduces costs. The defoaming agent can be used for defoaming of plastic, PE, PP, PS, ABS and other recycled plastics, plastic products production and other systems.

Antifoaming agent for sewage treatment can be directly added by drop or spray, and the amount of addition is generally the total amount of products; 0.05% ~ 0.3%;, The dilution ratio can be 1 to 10 times. Tap water can be used as the diluent. It is recommended to use it up the same day after dilution. For long-term storage, stabilizer must be added. The above is for routine use, and there may be deviation. Please consult with defoamer before use.

Antifoaming agent for sewage treatment can be directly added by drop or spray, and the amount of addition is generally the total amount of products; 0.05% ~ 0.3%;, The dilution ratio can be 1 to 10 times. Tap water can be used as the diluent. It is recommended to use it up the same day after dilution. For long-term storage, stabilizer must be added. The above is for routine use, and there may be deviation. Please consult with defoamer before use.

With the development of economy, plastic is more and more widely used, such as household appliances, automobiles, mobile phones and other fields, which are indispensable parts. The vigorous development of downstream industries has driven the demand for plastic, making a large number of plastic manufacturers rise. If you encounter foam problems during plastic production and use, Xiaobian suggests using plastic defoamer to deal with foam problems.

The anti foaming agent for tile mounting adhesive is made by a special process of ether, fatty alcohol, and various active additives. It is easy to disperse in water-based systems, has strong self-emulsification, good anti foaming performance, and long-term anti foaming performance, especially suitable for water-soluble polymers and medium to low viscosity systems.

Due to the absence of organic silicon in the product, it is safe for synthetic rubber and its derivatives, with stable chemical properties, acid and alkali resistance, non volatile, non-toxic and environmentally friendly.

can antifreeze defoamer really solve the foam problem? Yes, the antifreeze defoamer developed specifically for the foaming problem of antifreeze is a composite defoamer composed of multiple polymers. It has good defoaming effect on fine foam. It is less used, has strong water dispersibility, has adsorption power, and has very low surface tension, which will not affect the performance of the original product.

When purchasing latex paint, it is important to observe the details of whether the paint will blister, in order to avoid the problem of blistering after using low-quality latex paint. If you need latex paint defoamer, you can try latex paint defoamer. Emulsion paint defoamers can effectively eliminate bubbles in latex paint without affecting its original performance.

Silicon wafer cutting fluid is a commonly used processing fluid in the silicon wafer processing industry, which has good suspension, dispersion, lubrication and cooling performance, as well as stable quality indicators. However, when cutting or cleaning silicon wafers, a large amount of foam is often produced, which seriously affects the cutting efficiency, resulting in excessive consumption of cutting fluid and rising costs.